MPS and CMS software

MPS Software

Version date: 6.0.3050  [5/25/2018]
MPS Release notes  [5/25/2018]
Language: English
File type: .ZIP [27MB]

  • Requires Microsoft .NET Framework 4.5.2 or later.  The web install version of .NET is included in our SETPOINT Setup & Maintenance Software installer package.  The installer will first check to see if .NET is already installed on the computer, and if not, download it from the Microsoft website and install it before the Setup & Maintenance Software installation process proceeds. The computer must be connected to the internet during the installation process unless .NET is already present on it. If this is not possible, download the offline install version of .NET from the Microsoft website. This will allow .NET to be installed on computers without an internet connection. Then, install SETPOINT Setup & Maintenance Software on the computer(s). The install package will automatically detect that .NET is already installed, and the rest of the Setup & Maintenance installation will continue normally.  
  • This download installs three separate applications known collectively as SETPOINT Setup & Maintenance Software.  It consists of the following: 
  1. SETPOINT Rack Setup - used to configure a SETPOINT rack
  2. SETPOINT Rack Maintenance - used to upgrade firmware, perform rack diagnostics, and other rack maintenance tasks
  3. Simulator Launcher - used to emulate the touchscreen display when a physical rack is not connected; primarily intended for demonstration and training purposes
  • Refer to the MPS Operation & Maintenance Manual for additional details on installing and using SETPOINT Setup & Maintenance Software. You can also contact our Technical Support Team for assistance.

NOTE: The differences between the web install and offline install versions are detailed on the Microsoft page accessed via the link above. 

CMS Display Software

Version date: 5.0.3045 [5/25/2018]
CMS Release notes [5/25/2018]
Language: English
File type: .ZIP [28MB]

  • This download is for CMS Display software.  CMS Display can be used to connect to a PI Server where SETPOINT vibration data is stored. It can also be used to open and view an archive file (.CMS file extension). To open an archive file, no additional software is required. To connect to a PI Server, additional OSIsoft PI System components must be installed (see below).
  • Connection to a PI Server hosting CMS data requires that the computer running CMS Display also has OSIsoft's PI AF Client (version 2014 or later) installed.  The installation process for CMS Display will automatically detect the presence of PI AF Client.  If present, the user will be able to connect to a PI Server.  If not present, the user will only be able to open and view CMS data archives (.CMS file format).  PI AF Client is not available for download from this website.  You must obtain it directly from OSIsoft.  Alternatively, you may contact SETPOINT Technical Support to obtain the installation file and corresponding instructions.
  • Data accessible by CMS Display software is stored in the OSIsoft PI System.  PI Server, PI AF Server, and additional OSIsoft components used in the PI System are supplied separately and not downloadable via this website.  For assistance, contact our Technical Support Team.
  • Refer to the CMS Operation & Maintenance Manual  for additional information on installing and using the software.

 

Version date: 5.0.3047 [5/25/2018]
Language: Russian
File type: .ZIP [28MB]

  • This is a Russian-language version of our current production-released (5.0.3045) English-language CMS Display software.

SETPOINT-to-PI Adapter Software

Version date: 5.0.3045 [25/5/2018]
Language:English
File type:.ZIP [7.3MB]

  • This application enables communications between one or more SETPOINT racks and a PI Server. The computer running this adapter is normally a PI Server but the software may alternatively reside on a separate computer in the PI Server's network. 
  • The computer running SETPOINT-to-PI Adapter must also have OSIsoft's PI AF Client (version 2014 or later) installed.  The installation process will automatically detect the presence of PI AF Client and prompt the user accordingly.  PI AF Client is not available for download from this website.  You must obtain it directly from OSIsoft.  Alternatively, you may contact SETPOINT Technical Support to obtain the installation file and corresponding instructions.  
  • PI Server, PI AF Server, Microsoft SQL, and additional OSIsoft components used in the PI System are supplied separately and not downloadable via this website.  For assistance, contact our SETPOINT Technical Support Team.
  • Refer to CMS Operation & Maintenance Manual for additional details.  You may also contact our Technical Support Team.

Version date: 5.0.3047  [25/5/2018]
Language:Russian
File type:.ZIP [7.3MB]

  • This is a Russian-language version of our current production-released (5.0.3045) English-language SETPOINT-to-PI Adapter software.